Fits H11 or H8 or H9 Headlight bulbs. This harness relay is for either a two headlight or four headlight H11, H8 or H9 system, because it comes with four plug ins that also fit H8 and H9.
The harness relay can be used for high wattage bulbs or HID kits that require correct voltage to ignite.
It is plug and play, no cutting required.
This is the best harness on the market.
We have been selling them for over 10 years and improving them over the years.
Comes with two 35Watt / 30 Amp Relays. When HID ignites, for the first 5 seconds during power up, HID system can draw up to double the normal power, to ignite, the ignitor. As the HID capsule warms up, the current drops down to 35w by powering the ballast and xenon bulbs through a harness relay directly from the battery. With ballast or xenon bulbs, the high current is reduced. A relay acts as an on/off switch.This ensures that you\'re not over-loading your harness.
Includes: One headlight wiring harness and two relays. 14 gauge wire, no fuse (you can add one of your own if you like.
HARNESS INSTALLATION
1. Plug the harness into one side of your vehicle’s factory harness that normally attaches to your headlights.
2. Connect the relay to the harness plug.
3. Connect all the black wires to a ground (body of vehicle).
4. Connect the red wires to the positive side of the battery.
5. Attach to the headlights, or if using HID, attach to your ballast.